Smithweld Pipe Rotators

Click your selection below....

SW 1TR Pipe Welding Rotator SW 3TR Pipe Welding Rotator SW 4TR Pipe Welding Rotator SW 6TR Pipe Welding Rotator SW 10TR Pipe Welding Rotator SW 15TR Pipe Welding Rotator SW 25TR Pipe Welding Rotator Pipe Welding Rotator Table SW 1TR Pipe Welding Rotator SW 3TR Pipe Welding Rotator SW 4TR Pipe Welding Rotator SW 6TR Pipe Welding Rotator SW 10TR Pipe Welding Rotator SW 15TR Pipe Welding Rotator SW 25TR Pipe Welding Rotator Pipe Welding Rotator Table

Pipe Rotators

Choosing a Smithweld Australian Made Pipe Rotator

The decision to purchase a welding pipe rotator can sometimes be difficult as the reason to any purchase must be based on potential savings with production & improvements in quality.

Reliability and the Prevention of damage to motor and controls

The Smithweld range of welding rotators have been well researched and designed to ensure that all controls, motor gearbox combinations and gear drives are enclosed to prevent mechanical damage or ingress of grinding dust.

The price you pay for any piece of equipment should reflect the build quality, reliability and how much maintenance is required during the life of the unit and spares are readily available. We pride ourselves on achieving all of the above.

Pipe rotators/ limitations

The capacity of any drive module of a pipe rotator is limited by the number of idlers you choose to support the pipe or vessel. Always consider the weight per metre of pipe as the drive bogey may have ample torque to rotate the pipe but may need multiple idlers to carry the total weight.

Smithweld cater for pipe spooling, pile joining and pressure vessel from 1,000kg to 25,000kg, each of which requires an understanding of pipe diameter to wall thickness ratio. Allow us to guide you to the most suitable rotator for your application.

Smithweld rotators are compliant with AS/NZS-3000-2009 electrical standards.

The following Australian made products may assist in choosing the most suitable Rotator:

To see our range of Positioners CLICK HERE.



SW-1TR-4-AC

1000kg Pipe Rotator

Specifications

  • Capacity: 1000kg.
  • Voltage: 220 - 240V.
  • Speed range: 0 - 4rpm.
  • Overload protection: current limiting protection.

External Dimensions

  • Depth: 540mm.
  • Width: 650mm.
  • Height: 280mm.
  • Net Weight: 60kg (estimate)
For a PDF brochure click HERE

Return to top of page
SW 1TR Pipe Welding Rotator


SW-3TR-2-75-1200

3000kg Pipe Rotator

Specifications

  • Capacity: 3000kg.
  • Voltage: 220 - 240V – single phase.
  • Speed range: 0 - 3rpm.
  • Overload protection: current limiting protection.

External Dimensions

  • Depth: 850mm.
  • Width: 270mm.
  • Height: 360mm.
  • Net Weight: 92kg (estimate)
For a PDF brochure click HERE

Return to top of page
SW 3TR Pipe Welding Rotator SW-3TR-2


SW-4TR-4-75-1200

4000kg Pipe Rotator

Specifications

  • Capacity: 4000kg.
  • Voltage: 220V -– 240V.
  • Speed range: 0 –- 3rpm.
  • Overload protection: current limiting protection.

External Dimensions

  • Depth: 950mm.
  • Width: 800mm.
  • Height: 340mm.
  • Net Weight: 138kg (estimate)
For a PDF brochure click HERE

Return to top of page
SW 4TR Pipe Welding Rotator SW-3TR-2


SW-6TR-2-300-2000

6000kg Pipe Rotator

Specifications

  • Capacity: 6000kg.
  • Voltage: 220 - 240V single phase.
  • Speed range: 0.1 -– 42rpm.
  • Overload protection: current limiting protection.

External Dimensions

  • Frame Length: 1800mm - 3000mm.
  • Width: 550mm.
  • Height: 340mm.
  • Net Weight: 180 - 260kg (estimate)
For a PDF brochure click HERE

Return to top of page
SW 6TR Pipe Welding Rotator


SW-10TR-4-300-2000

10,000kg Pipe Rotator

This custom built rotator with dual drive eliminates the difficulty encountered with aligning the drive bogey with the idler. The positive contact to pipe or vessel ensures smooth rotation at all travel speeds.

Specifications

  • Capacity: 10,000KG
  • Voltage: 240V single phase
  • Speed Range: 100 - 600mm/min
  • Overload Protection: Current Limiting

External Dimensions

  • Frame Length: 2400mm
  • Width: 600mm
  • Height: 500mm
  • Net Weight: 290kg (main drive)
  • Idler Weight: 215kg
For a PDF brochure click HERE

Return to top of page
SW 10TR Pipe Welding Rotator



SW-15TR-300-2000-D525

15,000kg Pipe Rotator

Specifications

  • Capacity: 15,000KG
  • Voltage: 240V single phase
  • Speed Range: 100 - 600mm/min
  • Overload Protection: Current Limiting

External Dimensions

  • Main Frame Length 1.8m - 2.0m
  • Width 860mm
  • Height 630mm
  • Net Weight 550kg (main drive)
  • Idler Weight: 290kg.
For a PDF brochure click HERE

Return to top of page
SW 15TR Pipe Welding Rotator SW-4TRI Idler


SW-25TR-300-2000-T525

25,000kg Pipe Rotator

Specifications

  • Capacity: 25,000KG
  • Voltage: 240V single phase
  • Speed Range: 100 - 600mm/min
  • Overload Protection: Current Limiting

External Dimensions

  • Main Frame Length: 1.8m - 2.0m
  • Width: 860mm
  • Height: 630mm
  • Net Weight: 630kg (Estimate)
  • Idler Weight: 330kg.
For a PDF brochure click HERE

Return to top of page
SW 25TR Pipe Welding Rotator


SW-4TFR-1500

4000kg - Flat Rotating Table

A horizontal based rotator for welding pipes on the horizontal plane. Capable of rotating loads up to 4 tonne.

Specifications

  • Capacity: 4000KG
  • Voltage: 220 - 240V single phase
  • Speed Range: .01-3RPM
  • Overload Protection: Current Limiting
  • Protection: Digital Control

External Dimensions

  • Depth: 700mm
  • Width: 1500mm
  • Height: 340mm
  • Net Weight: 138kg (Estimate)
For a PDF brochure click HERE

Return to top of page
Pipe Welding Rotator Table

Smithweld Enterprises Pty Ltd produces a range of:

Electrode (Rod) Ovens Welding Pipe Positioners Welding Rotators SAW STT Welding Booms Welding Accessories Pre-heat Burners Racking Systems

Services and further information:

Products Contact Us